Warmerly
A drag-and-drop canvas that branches on opened, clicked, replied or timeout, with email, LinkedIn and wait steps.
Warmerly
Dripify
One-to-one · Sequence builder and conditions
Sequence builder and conditions
One row, in depth: what each tool does, the verified numbers, and who each suits.
Dripify details read from its pricing page, FAQ, features pages and help centre on 21 October 2026.
Warmerly
A drag-and-drop canvas that branches on opened, clicked, replied or timeout, with email, LinkedIn and wait steps.
Dripify
A drag-and-drop builder with four conditions: if connected, if viewed message, if email is available and if open profile.
The short answer
Sequence builder and conditions, in one look.
Warmerly's canvas has one condition step that branches on replied, clicked, opened or a timeout. Dripify's builder is drag and drop with four named conditions: if connected, if viewed message, if email is available and if open profile. Each is a one-time check at one moment. Dripify's conditions fit LinkedIn better, Warmerly's fit email better. Last checked 21 October 2026.
DripifyDripify ahead on this row
A drag-and-drop builder with four conditions: if connected, if viewed message, if email is available and if open profile.
The picture
Drawn side by side.
One condition step, four outcomes
How each builder decides which way a lead goes
WarmerlyDripify
Warmerly
One condition step waits for a set time and races the outcomes. The order is the order it checks.
- 1RepliedChecked first. A reply wins.
- 2ClickedNext, read from the lead's latest email.
- 3OpenedNext, read from the lead's latest email.
- 4TimeoutIf time runs out with nothing matched, this edge fires.
Dripify
Four conditions, each a one-time check with a path for met and a path for not met.
Is the lead already a connection?
Met
Send a message, or end the sequence for connected leads
Not met
Send a connection request
| Product | Conditions |
|---|---|
| Warmerly | One condition step: replied, clicked, opened or timeout |
| Dripify | If connected: Is the lead already a connection? |
| Dripify | If viewed message: Has the message you sent been viewed? |
| Dripify | If email is available: Is the lead's email address in the system? |
| Dripify | If open profile: Does the lead have an open LinkedIn profile? |
A lead who never accepts
What each builder can do about it
WarmerlyDripify
Warmerly
Connection requestWait for acceptanceRe-check every 6 hoursSkipped after 21 days
Dripify
Connection requestIf connectedNot met: your own pathView, like or email
Warmerly's check is built in, so you cannot draw a different path from it. In Dripify you draw the path yourself, from its conditions.
How Warmerly does it
Warmerly, in detail.
A drag-and-drop canvas with a condition step that branches on replied, clicked, opened or a timeout, mixed with email, LinkedIn and wait steps. LinkedIn rules like waiting for a connection are built in, not drawn as a branch.
01
One condition step, four outcomes
A condition step waits for a set time and races the outcomes against each other. A reply wins first, then a click, then an open, and if the time runs out with nothing matched the timeout edge fires (or the default edge). The opened and clicked outcomes are read from the lead's latest email. The step is checked once per engine tick.
Warmerly product, checked 21 October 2026
02
Only the canvas makes branches
Branching sequences are built in the drag-and-drop canvas. The simpler list editor handles linear sequences only: email, wait, LinkedIn connection, LinkedIn message and WhatsApp message. If a sequence has a condition, the list editor refuses to show it rather than flatten it.
Warmerly product, checked 21 October 2026
03
LinkedIn rules are built in
Before a LinkedIn message step the engine checks whether the lead is now a first-degree connection. If not, it re-checks every 6 hours and skips the lead 21 days after the invitation. You cannot draw an alternative path from that check, for example to switch to email when an invitation is ignored.
Warmerly product, checked 21 October 2026
04
A reply stops the sequence by default
A genuine reply stops the lead's sequence by default, and unsubscribes go on a workspace-wide suppression list that every step respects.
Warmerly product, checked 21 October 2026
05
Where Warmerly is behind
We found no condition on whether a lead is connected, has an open profile, followed you or visited your profile, and no branch on a missing email address. A lead who never accepts cannot be sent down a different path by a rule you draw.
Warmerly product, checked 21 October 2026
How Dripify does it
Dripify, in detail.
Dripify's drag-and-drop builder mixes LinkedIn and email actions with delays and four conditions, plus 18 ready-made templates.
01
Actions in a sequence
Eight actions are listed: connection requests, messages, endorsements, profile views, follows, unfollows, likes and emails. Delays between steps can be customised.
help.dripify.com/en/articles/5028711-what-actions-can-be-added-to-your-sequence · read 21 October 2026
02
Four conditions
If connected, if viewed message, if email is available and if open profile. Each has one path for met and another for not met.
help.dripify.com/en/articles/6788403-how-to-use-conditions · read 21 October 2026
03
One-time checks
A condition checks the status at one moment, and the help article says a lead will not switch branches if the status changes later.
help.dripify.com/en/articles/6788403-how-to-use-conditions · read 21 October 2026
04
Ready-made templates
18 templates in four groups (generate leads, recruit talent, build connections, engage the network), each for LinkedIn, email or both. Templates shown depend on how you add leads.
help.dripify.com/en/articles/12478338-how-to-use-templates-in-dripify · read 21 October 2026
05
A/B testing
Listed on the Advanced plan card. The cold email page says you can test up to three variants of an email and track replies for each.
dripify.com/features/cold-email · read 21 October 2026
What Dripify does not say
We looked, and found no statement on these. That is about its published pages only, not about the product.
- Named delay options or limits
- A timeout branch
- Whether the A/B feature is live, since a waitlist box describes it as rolling out
Where the sources disagree
We report each version rather than pick one.
- Dripify's home page lists 10+ actions and conditions, its LinkedIn page lists 15+, and its help centre names eight actions and four conditions.
- A/B testing is listed on the Advanced card, not named on its drip campaigns page, and described as rolling out in a waitlist box.
The numbers
Only what we could verify.
| Measure | Warmerly | Dripify |
|---|---|---|
| Sequence builder and conditions | A drag-and-drop canvas that branches on opened, clicked, replied or timeout, with email, LinkedIn and wait steps. | A drag-and-drop builder with four conditions: if connected, if viewed message, if email is available and if open profile. |
| Conditions listed | 1 condition step with 4 outcomes: replied, clicked, opened, timeout | 4: connected, viewed message, email available, open profile |
| Conditions on LinkedIn state | None found; the connection check is built in | If connected, if open profile |
| Conditions on email | Replied, clicked, opened | If email is available |
| Ready-made templates | A LinkedIn then email template | 18 across 4 groups |
| Build style | Drag-and-drop canvas for branches; a list editor for straight lines | Drag-and-drop builder |
In practice
What it means for you.
Our reading of the facts above. Not a promise, and not the only reasonable reading.
LinkedIn branching is Dripify's strength
Warmerly cannot branch on whether a lead is connected or has an open profile.
Email branching is Warmerly's strength
Warmerly branches on opened, clicked and replied. Dripify lists none of those as conditions.
Both stop on a reply in the usual cases
Warmerly stops a lead's sequence on a genuine reply by default; Dripify has a help article on resuming a sequence for a lead that replied.
Who it suits
Pick the one that fits.
Warmerly
Warmerly is the better fit if
- Your branches depend on opens, clicks and replies
- You want A/B versions of an email in a sequence
Dripify
Dripify is the better fit if
- Your branches depend on connection state or an open profile
- You want ready-made LinkedIn and email templates by use case
Questions
What conditions does Dripify have?
Four, per its help article: if connected, if viewed message, if email is available and if open profile.
Can Warmerly branch on LinkedIn state?
Not on whether a lead is connected: that check is built in, and a lead who never accepts cannot be sent down a different path by a rule you draw.
Can Dripify branch on email?
One of its four conditions is if email is available, a one-time check at one moment. The others are if connected, if viewed message and if open profile.
Which builder fits email better?
Warmerly's canvas has one condition step that branches on replied, clicked, opened or a timeout, so its conditions fit email better. Dripify's fit LinkedIn better.
Sources
- Dripify pricing
- Dripify drip campaigns
- Dripify help: actions
- Dripify help: conditions
- Dripify help: templates
- Dripify cold email
Dripify pages were read on 21 October 2026. Plans and wording change, so check the vendor's own page before you decide. Warmerly details come from the product as it runs today.
More features
- All features
- Main job
- Starting price (per month)
- What the price covers
- Free trial
- LinkedIn automation
- Daily limits and account safety
- Own IP address per account
- Mailbox warmup
- SPF, DKIM and DMARC checks
- Email sending and mailboxes
- Inbox placement checks
- Reply inbox
- Lead finding and verification
- Team management
- Integrations and API
See it on your own mailbox.
Connect a mailbox. Warmerly runs alongside whatever you send from now, so you can compare before you move anything.
Free plan, no card. Paid plans: 7-day trial, first charge on day 8.