Warm up now. Book January. New year head start: 30 days free on any paid plan. Claim 30 days freeConnect your own mailbox and we add a free one on our domain, for warmup and replies. See how it works

Skip to content
Best practices

Email Warmup Best Practices: How to Do It Right in 2026

Understanding what email warmup is gets you halfway there. Knowing how to do it correctly (setup, schedule, monitoring, and scaling) is the part most senders miss. Here is the full picture.

Kristiyan Tsvetanov · 13 min read · Updated 29 September 2026

Start warming freeSee pricing
  • Free plan, no time limit
  • 7-day trial on paid plans
  • 30-day warmup guarantee, with conditions
  • Customer data is hosted in the EU

The email warmup best practices that matter most: warm a dedicated sending domain, never your main one; get SPF, DKIM (2048-bit) and DMARC passing first; use a tool that rescues mail from spam and replies with quoted history; let the volume ramp day by day, from 4 messages a day to 50 by day 30; launch only when health holds above 80; and keep warmup running at reduced volume for as long as the mailbox sends.

On this page
  1. 1. Get the foundation right before warmup starts
  2. 2. Choose a warmup tool that performs the right actions
  3. 3. Follow a gradual warmup schedule
  4. 4. Know the signals that tell you you are ready
  5. 5. Run warmup and cold campaigns at the same time
  6. 6. Monitor the right metrics throughout
  7. 7. Scale volume correctly after warmup
  8. 8. Common warmup mistakes to avoid

Most guides about email warmup spend three paragraphs explaining what it is and then end. This one is different. It assumes you already know you need to warm up your mailboxes. The question it answers is: how do you do it correctly, from start to scale?

The bad news: there are a lot of ways to get warmup wrong. Skipping authentication before starting, warming on the wrong domain, stopping warmup too early, or choosing a tool that generates fake engagement. Each of those mistakes will either slow you down or burn the mailbox entirely. The good news: done correctly, warmup is straightforward. Here is the full process.

Who this guide is for

Cold email senders, agencies, and sales teams who are setting up new mailboxes or fixing an underperforming sending setup. If you want a conceptual introduction to warmup, start with the email warmup guide. If you are ready to do it, this is the one.

1. Get the foundation right before warmup starts#

Warmup builds on a foundation. If the foundation is missing or broken, warmup does not help. It just wastes time and potentially builds reputation on a domain that can not hold it.

Before you connect a single mailbox to a warmup tool, check these four things:

  1. Dedicated sending domain. Never warm up or send cold mail from your main business domain. Register a variation of your domain specifically for outreach.
  2. SPF record configured. One TXT record at the domain apex listing your mail provider. No more than 10 DNS lookups. Ends with ~all until everything is verified.
  3. DKIM set up with a 2048-bit key. Your mail provider generates this. The public key goes in DNS. Confirm it in your mail provider's settings.
  4. DMARC at p=none with aggregate reporting. You do not need to be at p=reject yet. p=none with rua reports to a monitored address is the correct starting point.

Send a test email to a Gmail account you control and open the full headers. Every authentication check (SPF, DKIM, DMARC) should return PASS. If any of them fail, fix them before proceeding. Warmup on a domain with broken authentication is wasted effort.

Also check: has the domain been registered for at least two to three weeks? Domains under 14 days old start with essentially zero trust from Gmail and Outlook. Warmup can begin immediately after registration, but the domain needs to age alongside the warmup process. Do not send cold campaigns until the domain is at least three weeks old.

2. Choose a warmup tool that performs the right actions#

Not all warmup tools generate the same signals. The quality of the actions your warmup tool performs matters more than the volume of messages it sends.

The signals that move sender reputation in 2026, in rough order of importance:

  1. Spam-folder rescue. A peer moving your message from the spam folder back to the inbox is the single strongest positive signal Gmail tracks. This action tells the algorithm that a real human found your message relevant enough to rescue. Many warmup tools skip this, but the tool you use should do it on every peer message.
  2. Reply with quoted history. A full reply that includes the original message quoted with > prefixes mimics genuine human conversation. Filters weight it heavily.
  3. Star, label, and mark important. These are explicit user-action signals. Humans do this to mail they want to keep.
  4. Open. Valuable but less weighted than it used to be, especially after Apple Mail Privacy Protection normalized phantom opens.
  5. Cross-provider engagement. Peers at Gmail opening and replying to messages from Outlook senders (and vice versa) passes reputation signals between providers.

Avoid tools that only send and open. A network that only sends messages and records opens looks like automation to Gmail. A network that sends, replies, stars, and rescues looks like real mail.

Also check the composition of the peer network. A warmup pool made entirely of other warming mailboxes (all recently registered, all doing warmup) is detectable. You want a pool that includes aged, healthy mailboxes with genuine sending history.

3. Follow a gradual warmup schedule#

Warmup volume should ramp gradually. Starting too high signals volume-sending behaviour before reputation is established. Warmerly handles this automatically and shows each mailbox's current limit and why. If you use another tool, this is the shape to audit it against.

A sensible schedule for a new domain and new mailbox:

  • Day 0: 4 warmup messages a day.
  • Day 3: 8 a day.
  • Day 7: 15 a day.
  • Day 14: 25 a day.
  • Day 21: 35 a day.
  • Day 30: 50 a day.

A Gmail mailbox has a ceiling of 40 warmup messages a day, so the later steps are held at 40. An Outlook or Microsoft 365 mailbox has a ceiling of 30 warmup messages a day, so the later steps are held at 30. Between those points the number rises in small steps, so there are no sudden jumps. The count runs on the days a mailbox has actually been warming, not on calendar age or domain age, and there are no presets to pick from. If the health score or spam placement slips, that day's volume is cut back.

For brand-new domains (under 14 days old when warmup starts), add an extra week to each stage. The domain needs to age while reputation builds. Rushing this is the most common mistake agencies make when onboarding multiple new mailboxes at once.

4. Know the signals that tell you you are ready#

Warmup duration is not the only readiness signal. A mailbox ready for cold sends should meet all three of these benchmarks simultaneously:

  • Health score consistently above 80 for at least five consecutive days. A score that spikes and drops is not stable. Wait for it to hold.
  • Inbox placement above 90% across the providers your prospects use. If your prospects are mostly Gmail users and your Gmail placement is 75%, you are not ready.
  • Spam rescue rate declining. Early in warmup, a meaningful portion of your warmup messages will land in spam and be rescued. As reputation builds, fewer land in spam in the first place. A declining rescue rate means warmup is working.

If your tool does not surface these metrics, that is a red flag about the tool. You should be able to see health score, inbox placement by provider, and spam rate in a single dashboard view.

The readiness test

Before sending your first cold campaign from a warmed mailbox, send a seed message to a test address at the same provider your prospects use (Gmail or Outlook). Check where it lands. If it lands in the primary inbox, you are ready. If it goes to spam or promotions, give warmup more time.

5. Run warmup and cold campaigns at the same time#

This is the best practice most senders get wrong: warmup does not stop when campaigns start. It runs alongside them, at reduced volume, for as long as you are sending.

Sender reputation is not a level you reach and keep permanently. It decays during quiet periods, and it comes under pressure when campaign volume increases. Ongoing warmup counteracts both. The warmup messages act as a reputation buffer: positive signals running in the background that offset any negative signals from bounces or low-engagement campaigns.

A practical rule: keep warmup running at reduced volume while campaigns are active. If a campaign stops, keep warmup running during the gap until the next campaign starts. A mailbox that sits dark loses reputation.

If you pause warmup and then notice a drop in reply rates two to three weeks later, this is almost certainly the cause. The fix is to resume warmup and wait one to two weeks before re-evaluating.

6. Monitor the right metrics throughout#

Warmup without monitoring is warmup on faith. These are the numbers to track weekly:

  • Health score trend. It should trend upward in weeks one and two and stabilize above 80 in week three. A score that plateaus under 70 or drops week-on-week means something is wrong with authentication, the peer network, or the domain itself.
  • Inbox placement by provider. Check Gmail and Outlook separately. They use different signals and a mailbox can perform well on one and poorly on the other.
  • Spam rescue rate. Declining over time is good. Stable or increasing means warmup is not building the reputation it should.
  • Domain reputation in Google Postmaster Tools. Free to set up. The Domain Reputation tab is the most authoritative signal for Gmail. Anything below High is worth investigating.
  • Bounce and complaint rate on campaigns. Hard bounces above 2% or complaint rates above 0.1% will damage warmup progress regardless of how good your warmup setup is.

Set aside 10 minutes every Monday to check these five metrics. Most warmup problems are slow-moving and catch early. A domain that trends the wrong way for two weeks before anyone looks has usually done real damage by then.

7. Scale volume correctly after warmup#

Volume ramp after warmup ends is one of the most common places senders break deliverability that was working perfectly during warmup.

Start cold campaigns the same way, gradually:

  • Start cold sending low, well below your target volume.
  • Raise it a little each week, and watch bounces, complaints and your health score as you do.
  • Keep warmup running underneath, at a reduced volume.
  • If the numbers slip, hold or step back before going on.
  • Scale outreach across more mailboxes and domains, not by pushing one mailbox harder.

If you need high volume, that is not one mailbox pushed hard. It is more mailboxes across several sending domains, each at a safe volume. That is how agencies do it at scale without burning infrastructure.

Warmup best practices as do and don't: Domain: do warm a dedicated sending domain, don't warm the domain your company runs on; Authentication: do spf, 2048-bit dkim and dmarc passing first, don't start warmup and fix dns later; Tool: do rescue from spam, reply with quoted history, don't send-and-open networks of new mailboxes; Schedule: do let the ramp rise day by day from 4 a day to 50 by day 30, don't jump straight to high volume; Readiness: do health above 80 for five days, placement above 90%, don't launch because the calendar says so; Campaigns: do keep warmup running at reduced volume, don't switch warmup off when campaigns start; Monitoring: do ten minutes every monday on five metrics, don't find out from the reply rate; Scale: do add more mailboxes, don't push one mailbox harder.

8. Common warmup mistakes to avoid#

  • Warming up your main business domain. If something goes wrong during warmup or campaigns, you want the damage contained to a dedicated sending domain, not the one your company uses for everything.
  • Starting warmup before fixing authentication. SPF, DKIM, and DMARC must all pass before warmup adds any value. Authentication is the entry fee; warmup is what builds on top of it.
  • Sending cold mail during warmup. Even a small cold batch mid-warmup resets progress and risks flagging the mailbox. Wait until warmup is complete.
  • Using a warmup tool with a closed peer network. A pool of nothing but newly registered warming accounts is detected quickly. You need a diverse peer pool with aged, healthy mailboxes mixed in.
  • Stopping warmup when campaigns start. Warmup is maintenance, not a phase. Running it continuously at reduced volume keeps reputation stable through quiet weeks and volume spikes.
  • Ignoring health score drops. A declining health score is an early warning signal. If it drops for three consecutive days, pause campaigns and investigate before it compounds.
  • Warming up too many mailboxes at once on the same new domain. A single domain trying to warm five mailboxes simultaneously looks like bulk infrastructure. Stagger mailbox additions: add one, let it stabilize, then add the next.

Warmup threads

Real threads, every day.

Warmup mailboxes send to each other, open the emails and reply in the same thread.

Animation: warmup mailboxes trading emails and replying in the same thread

Questions

How long should email warmup take before I can start sending cold emails?

Warmerly's ramp runs 30 days, from 4 warmup messages a day to 50, and counts days spent warming, not domain age. The right signal to watch is not the number of days but the metrics: health score above 80, inbox placement above 90%, and spam rescue rate declining. When all three hold for five consecutive days, the mailbox is ready.

Should I keep running warmup after my cold campaigns start?

Yes. Warmup should run continuously at reduced volume (a reduced volume) throughout the life of your campaigns. Sender reputation decays when mailboxes go quiet, and ongoing warmup counteracts both quiet periods and any negative signals from campaign bounces or complaints. Stopping warmup when campaigns start is one of the most common reasons deliverability degrades after a few weeks.

What is the most important action a warmup tool should perform?

Spam-folder rescue: a peer moving your message from the spam folder back to the inbox. This is the strongest positive signal Gmail tracks and the action most warmup tools skip. Look for a tool that performs rescue actions on every peer message, not just opens and replies.

How many cold emails can I send per day from a warmed mailbox?

There is no single safe number: it depends on the mailbox's provider, its reputation and its history, so start low, raise volume gradually and watch bounces and complaints. Scale horizontally: use multiple mailboxes across multiple sending domains rather than pushing one mailbox above its natural ceiling.

Can I warm up multiple mailboxes on the same domain at the same time?

You can, but stagger the additions. Adding five mailboxes to a brand-new domain simultaneously looks like bulk infrastructure setup. Add one mailbox, let it stabilize over five to seven days, then add the next. A domain with five aged, independently warmed mailboxes performs significantly better than one where all five warmed in parallel from day one.

What should I do if my health score drops during warmup?

First, check authentication: confirm SPF, DKIM, and DMARC are still passing. Then check whether any cold sends happened during the warmup period. If neither explains the drop, check Google Postmaster Tools for domain-level reputation signals. A drop that holds for more than three days without a clear cause is worth pausing warmup and investigating before it compounds.

Every practice on this page, running on its own.

Warmerly rescues spam-folder mail every 10 minutes, replies with quoted history, ramps by days spent warming and re-checks DNS daily. Free for one mailbox, no card required.

Start warming freeSee pricing
  • Free plan, no time limit
  • 7-day trial on paid plans
  • 30-day warmup guarantee, with conditions
  • Customer data is hosted in the EU